Industrial and kitchen channels are used both for continuously high drainage and for sporadic removal of water. They are available in two variants: the first version has an inlet width of 250mm and is made of 1.5mm thick stainless steel, while the second model has an inlet width of 500mm and is also made of 1.5mm thick stainless steel. The products are 370 and 620mm wide respectively, when the flange is taken into account. The floor drain for the industrial and kitchen channels is made of 2.0mm thick stainless steel and comes with a bell plunger and vertical outflow.
Depending on their intended purpose, the channels can be combined with one of three industrial and kitchen gratings. The 7 × 7mm Hydra Linearis longitudinal bar gratings are pleasant underfoot at swimming pools. With a bar width of 7mm, they can be walked across barefoot without worries. Stainless steel mesh gratings are also available in the standard version or as a non-slip variant. The latter has a serrated tread surface that provides safety underfoot in commercial kitchens and industrial facilities where waste water may contain lubricants and grease.
Shower channels in special sizes
The Elix shower channel is also suitable for use in large-scale sanitary facilities. The new product is available with different upstands and wall connections. The stainless steel channels can be selected with matching gratings as needed. Richard Brink manufactures each one in the desired dimensions to fit the tile grid in question.