Trust in more than 45 years of experience
Made-to-measure production from Germany
Dimpled sheet cover track
For a cleaner look along the façade
- To fit dimpled sheets along the façade
- Perforations ensure that precipitation is directed towards the dimpled sheet
- Clamped to the façade with paving: no screwing required
- Clean, straight exposed metal edge
- Protects dimpled sheet from UV radiation
- Available for dimpled sheet thicknesses 6mm to 13mm and 13mm to 20mm
- Made from aluminium or stainless steel
Combined with dimpled sheets, our cover track creates a clean and straight exposed edge on rising surfaces in next to no time. The product is available in two different variants and dimensions to fit commercially available dimpled sheets. Custom measurements are also available on request. During assembly, the track is simply placed over the dimpled sheet and pressed against the façade in the subsequent paving step to ensure adequate fixing. This also means that no tools are required for assembly. Additionally, the track provides protection from radiation for the part of the dimpled sheet that would otherwise be exposed.
The upper flange has perforations at intervals of 20mm. These guarantee that any precipitation from the façade is redirected towards the dimpled sheet. All versions of the 1mm-thick cover tracks are delivered in lengths of 3,000mm.
Reveal drainage
| Material: | For dimpled sheet thicknesses from 6mm to 13mm: | For dimpled sheet thicknesses from 13mm to 20mm: |
| aluminium, stainless-steel | Wall-side flange: 50mm Upper flange: 15mm incl. perforation every 20mm Surface-side flange: 25mm | Wall-side flange: 50mm Upper flange: 22mm incl. perforation every 20mm Surface-side flange: 25mm |
| Material thickness: | ||
| 1,0 mm | ||
| Length: 3,000 mm |
